Archives

Parker Ultra High Pressure Hose | 2440D / 2440N | WP 900-2070 Bar | Hydraulic & Water Jetting

Parker Ultra High Pressure Hose | 2440D / 2440N |

Hydraulic and water jetting applications

Applications

Ultra high pressure service for the construction and shipbuilding industries and for general industrial cleaning applications. For use with petroleum or synthetic hydraulic fluids, gas and chemical fluids. Especially suitable for hydraulic bolt tensioning equipment, test rigs, as well as in offshore hydraulic and gas applications.

Features

• Industry standard on ultra high pressure thermoplastic applications
• Light weight and abrasion resistant thermoplastic hose
• Used in hydraulic flying lead bundles

1″ Parker Hose | 2440N-16V91-10K | WP 690 Bar | V91 Offshore

Parker Hose – 2440N-16V91-10K – Oil and gas applications

 

Applications

Long length subsea umbilical hose suitable for deep sea applications. Used for MEG and chemical injection. 10,000 psi tooling.

Features

• Low dimensional change under pressure which results in excellent response times
• Smooth bore for low pressure drop
• Meets or exceeds the performance requirements of ISO 13628-5 / API 17E
• Methanol washed Nylon PA11 core tube

Parker Spiral Wire Hose | 2440N | WP 560-865 Bar | Offshore

2440N – Oil and Gas applications

 

Applications

Long length subsea umbilical hose suitable in deep sea applications. Used for MEG and gas injection when high pressures are required.

Features

• Low dimensional change under pressure which results in excellent response times
• Smooth bore for low pressure drop
• Offshore safety factor standard (4:1 SF)
• Meets or exceeds the performance requirements of ISO 13628-5 / API 17E
• Methanol washed Nylon PA11 core tube

Parker Ultra High Pressure Hose | 2440D / 2440N | WP 900-2070 Bar | Hydraulic & Water Jetting

Parker Ultra High Pressure Hose | 2440D / 2440N |

Hydraulic and water jetting applications

Applications

Ultra high pressure service for the construction and shipbuilding industries and for general industrial cleaning applications. For use with petroleum or synthetic hydraulic fluids, gas and chemical fluids. Especially suitable for hydraulic bolt tensioning equipment, test rigs, as well as in offshore hydraulic and gas applications.

Features

• Industry standard on ultra high pressure thermoplastic applications
• Light weight and abrasion resistant thermoplastic hose
• Used in hydraulic flying lead bundles

Downloads

Catalogues Below are each of  our catalogues, separate datasheets, and full product sections are available to download to your computer. Abdex Overview Catalogues Capability StatementAbdex Overview Oil & Gas  

Parker Black Eagle Hose – 10,000 Psi

Black Eagle 10K  – Offshore applications

 

Applications

Designed for use in acidising, cementing, methanol injection, well stimulation and control fluids. Used as an alternative to steel pipe, flexible pipe and rubber hose. Can be utilised onshore or offshore.

Features

• ColorGard, visual early warning system
• Nylon 11 core tube offers high cleanliness
• Available in long continuous lengths
• Smaller OD than flexible pipe allows more hose per reel
• Excellent chemical resistance providing long service life
• More efficient deployment and recovery
• DNV Type approval (API 7K and API 17J)
• ABS Product Design Assessment (PDA) Certificate 13-HS1036876-PDA

Parker Polyflex Hose | Tough Jacket | WP 1400-2800 Bar |

3/16" Bore | WP 2800 Bar | Tough Jacket

Parker Polyflex Hose | Tough Jacket | WP 2800 Bar |

Abrasion Resistant Applications

The new Ultra High Pressure Tough Jacket™ hose types are equipped with a robust, yet flexible,Polyurethane cover, that is even more abrasion resistant than the standard double outer cover hose types from Parker Polyflex.This proprietary blend of Polyurethane provides up to 100 x more abrasion resistance than a standard Polyurethane cover.For extra safety, Parker Polyflex combines this WJTA colour coding compliant feature with Color Guard™.ColorGard™ features a second outer cover layer, that contrasts with the outer cover colour. This acts as a visual indicator of hose abrasive wear.

Features

• Extra abrasion resistant Polyurethane cover.
• Featuring ColorGard™ technology, a second outer cover layer that contrasts with the outer cover colour.
• No extra PVC sheath needed: – Compact O.D. – Lighter weight assemblies (up to 16%).
• Compliant with WJTA colour coding.
• Standard fitting series can be used.